New Products - FANN®

Blenders - Waring ®

For general purpose mixing use in laboratories

High rates of shear (rates of shear that exist in circulation of the drilling fluid in wells) are best obtained when there is little clearance between the stator and the rotor, or when the mud is pumped through a small orifice or opening.

Waring blenders, in which the blades rotate in a recessed section at the bottom of container, provide high shearing rates, and are suitable for shearing small quantities (about a liter) of mud. They can only be used for short periods of time because the temperature rises rapidly, with consequent loss of water by evaporation. The Waring Blender, with its high shear mixing impeller, is specified in several API test procedures for preparation of samples.

 

Two speed Blender, Stainless Steel Container, 1 HP motor to emulsify, homogenize, grind, shred, disintegrate and mix a wide spectrum of materials in seconds.

Capacity: 2 Liters (64 oz)
Switch Settings: Off - Lo – Hi
Speeds:  19,000 - 23,000 RPM
Base: Stainless steel motor housing with die-cast epoxy coated base
Container: Stainless steel and two piece vinyl/styrene cover
Overall Height: 19 inches
Weight: Net shipping weight 20 lbs.
Listing: UL, NSF/CSA

Ordering Information

Part No. 100021755, 120 Volt, 50/60 Hz  Waring No. HGBSS

 

Single speed Blender, Glass Container, with .40 HP motor

Capacity: 1 Liter/1.2 Liter (40 oz)
Switch Settings: High
One Speed: 22,000 RPM
Base: Epoxy Coated Motor Housing
Container: Heat resistant glass with handle and two piece vinyl/styrene lid
Overall Height: 14 inches/16 inches
Weight: 8 lbs./10 lbs.
Listing: UL

Ordering Information

Part No. 205632 120 Volt, 50/60 Hz  Waring No. 700G
Part No. 205635 230 Volt, 50/60 Hz  Waring No. 800G

 

Two speed Blender, Glass Container with .40 HP motor

Capacity: 1 Liter/1.2 Liter (40 oz)
Switch Settings: Two Speed
Speeds: High 22,000 Low 18,000 RPM
Base: Epoxy Coated Motor Housing
Container: Heat resistant glass with handle and two piece vinyl/styrene lid
Overall Height: 15 inches/16 inches
Weight: 11 lbs./13 lbs/13 lbs.
Listing: UL 

Ordering Information

Part No. 206561 120 Volt, 50/60 Hz  Waring No. 7011G
Part No. 206705 240 Volt, 50/60 Hz  Waring No.  8011G

 

Seven speed Blender, Glass Container, with .70 HP motor

Capacity: 1 Liter/1.2 Liter (40 oz)
Switch Settings: 7 speed push-button blender with solid state SCR control
Speeds: 3,500 to 22,000 RPM in 7 steps
Base: Epoxy Coated Motor Housing
Container: Heat resistant glass with handle and two piece vinyl/styrene lid
Overall Height: 15 inches/16 inches
Weight: 11 lbs./13 lbs.
Listing: UL

Ordering Information

Part No. 206023 120 Volt, 50/60Hz  Waring No. 7012G

 

Accessories 

Blender Base, Part No. 205633  Single Speed, Base without container,  120 Volt, 50/60 Hz

Blending Assembly, Part No. 100002439  Replacement Blade

Blender Container, Part No. 205634  Glass Container, 1 Liter (40 oz) 

Blender Container, Part No. 101576553  Stainless Steel Container, 1Liter (40 oz)

Lid for Blender, Part No. 206559  Cover for Glass Container

Mini Container, Part No. 206021  Capacity: 12-37 ml, Stainless Steel Container and Base with Snap-fit Lid & Blending Assembly

Mini Container, Part No. 206022  Capacity: 37-100 ml, Stainless Steel Container and Base with Snap-fit Lid & Blending Assembly

 

Related Information

Related Information