New Products - FANN®

Filter Press Half Area

Half Area Filter PressCompact version of the standard filter
press

The Half Area Filter Press is a compact
version of the standard Filter Press and
employs 1/2 size filtration area. Time and pressure requirements are the same as for the API filter press. Readings are converted to standard measure by multiplying by two
as specified in the American Petroleum
Institute, API Recommended Practice 13B-1
and 13B-2
.

The Half Area Filter Press can be used in the conventional manner or in the upside
down position to make measurements free of settling of the solids. Laboratory tests indicate that variation in filtration rate may be obtained due to solids settling. This unit makes possible a routine test to determine more nearly the true filtration and wall cake condition of the hole. The Half Area Filter Press has 1/2 the API filtration area and all filtrate volumes must be multiplied by 2 to correlate with API specifications.

The Half Area Filter Press consists of a filter cell body (cell) containing a pressurizing inlet, a pressure regulator, and a pressure gauge. A rubber diaphragm (boot) is supplied to contain the drilling fluid and separate it from the pressurizing gas. The boot allows the filter cell to be operated in any position. A reversible frog mounting is provided on the exterior of the cell to allow conventional filtration or upside down filtration. A wall mounting bracket is provided for supporting the filter press on a wall.

Ordering Information

Part No. 207228 Half Area Filter Press

 

Half Area Filter Press

Filter By  
Количество записей на странице Show     results per page
  TitleНазвание  DateДата
Related Information

Related InformationДополнительная информация