Aniline Point Test Kit

The Fann Aniline Point Test kit is used in the determination of the aniline point of petroleum products and hydrocarbon solvents, such as diesel oils and mineral oils used in preparation of oil-based drilling fluids.

This method is suitable for transparent liquid samples having an initial boiling point above room temperature and where the aniline point is below the bubble point and above the solidification point of the aniline-sample mixture. 

This procedure is similar to Method A of ASTM: D611-82 (1982) and IP: 2/76 (1976).

SAFETY WARNING

MAY BE FATAL IF SWALLOWED, INHALED OR ABSORBED THROUGH SKIN. COMBUSTIBLE. CAUSES IRRITATION. MAY CAUSE METHEMOGLOBINEMIA.

Do not breathe vapor. Avoid contact with eyes, skin and clothing. Keep container closed. Use with adequate ventilation. Wash thoroughly after handling.

EMERGENCY/FIRST AID: In all cases call a physician immediately. If swallowed, induce vomiting immediately by giving two glasses of water, or milk if available and sticking finger down throat. Never give anything by mouth to an unconscious person. IF INHALED, remove to fresh air. If not breathing, give artificial respiration. DO NOT GIVE MOUTH-TO-MOUTH RESUSCITATION. If breathing is difficult, give oxygen. Keep patient warm and at rest. In case of contact, immediately flush skin or eyes with plenty of water for at least 15 minutes.